| | |  |  |
| | SBI-7126T-T1E | |  |
|
|
|
|
|
| Integrated Board |
|
|
|
|
|
Key Features
1. Dual Intel® 5500 series Xeon® Quad/
Dual-Core, with QPI up to 6.4 GT/s
and 95W
2. Intel® 5500 (Tylersburg) Chipset
3. Up to 48GB DDR3 1333/ 1066/ 800MHz
ECC Registered DIMM / 12GB
Unbuffered DIMM
4. Intel® 82576 Dual-Port Gigabit
Ethernet
5. 2 x 3.5" Hot-Plug SATA Drive Trays
6. Integrated Matrox G200eW Graphics
7. Integrated IPMI2.0 w/ remote KVM and
virtual media
8. Mellanox ConnectX QDR/DDR Infiniband
40/20Gbps or 10GbE support (Optional)
|
|
|
 |
|
|
|
|
|
|
|
 |
| SBI-7126T-T1E |
- Processor Blade SBI-7126T-T1E (Black)
|
| |
|
|
Super B8DTL-E |
| |
|
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5500
sequence (Nehalem-EP processor)
- NOTE: Support processors up to 95W
|
| QPI |
|
| |
|
| Memory Capacity |
- 6x 240-pin DIMM sockets
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 12 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
|
| Chipset |
- Intel® 5500 (Tylersburg) chipset
- ICH10R + IOH-24D
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1 support
|
| Infiniband Support |
- 4x QDR / DDR (40/20Gb/s) Infiniband mezzanine HCA (Optional)
|
| IPMI |
- Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
|
| Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
Super I/O |
|
| Clock Generator |
|
| |
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
|
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- KVM button
|
| LEDs |
- Power LED
- UID / KVM LED
- Network Activity LED
- Fault LED
|
| Connector |
- SUV (Serial/USB/Video) & KVM Connector
|
| |
|
|
| Hot-swap |
- 2x 3.5" SATA Hot-swap drive bays
|
| |
|
|
| KVM |
- 1 Front Connector for Supermicro KVM Card
|
| |
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
| United States / Canada |
- FCC- Emissions (US) Verification
|
| Europe |
- EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 - Harmonics
- EN61000-3-3 - Voltage Flicker
- CE - EMC Directive 89/336/EEC
|
| |
|
| United States / Canada |
- UL60950-1 - CSA/CUL 60950-1
|
| Europe |
- EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
|
|
|
|
|
|
| | | |
|
Términos y condiciones |
Privacidad |
Directiva RoHS
|
|
La
información proporcionada en este documento puede ser modificada en
cualquier momento sin necesidad de notificación previa. Los nombres de
productos y compañías mencionados son marcas comerciales registradas por sus respectivas compañías o propietarios. El
copyright del diseño y parte de los contenidos este portal web
corresponde a Supermicro, Inc., la versión española y los contenidos
relativos a ella corresponden a Supermicro Computer Spain, S.L.
Página visualizada el: Jueves, 09 de Septiembre de 2010 a las 09:52:31
|
|
|
Compañía
